KITA AIRair-to-air heat pump for industrial buildings and warehouses
Heats and cools industrial buildings, warehouses and workshops without a hydronic circuit, with an inverter compressor. Two versions available: KITA AIR and KITA AIR COLD.
(A 7°C / A 20°C)
Designed for
Large spaces to heat and cool
Benefits of KITA AIR
Designed for large industrial spaces
Inverter compressor with vapour injection and direct refrigerant exchange between the outdoor and indoor unit: one solution for heating and cooling.
Patented, only when needed
The patented defrost system, combined with 2.5 mm fin spacing and a hydrophilic coating on the outdoor coil, limits defrost cycles: lower consumption, a protected compressor and continuous operation even in winter.
No hydronic circuit
Direct refrigerant exchange between the outdoor and indoor unit, up to 30 m apart: no storage tanks or intermediate hydronic circuits, fewer losses and quick installation.
Quiet
Sound pressure of the outdoor unit at 5 m with flow grid and silence kit installed. Low-speed class A inverter fan, sound insulation and components on anti-vibration mounts.
Under control, even remotely
Touch display: real-time monitoring and adjustment, also remotely. Up to 15 units together with the MULTI-AIR panel.
K-Touch and Multi-Air →Performance
Performance in the cold
Heating capacity, expressed in kW, of the two versions as the outdoor temperature changes, with indoor air at 20 °C.
Cooling (A 35°C / A 27°C)
35.0 · 37.0 kWEER 4.02 · 4.20
Seasonal efficiency (average climate)
SCOP 5.15 · 5.04ETAs 203% · 198.6%
Operating range
−25°C / 28°Coutdoor air in heating · cooling 5°C / 45°C
Data sheet
KITA AIR technical specifications
Values in the order: KITA AIR · KITA AIR COLD.
- Heating capacity (A 7 °C / A 20 °C)
- 39.00 · 40.00 kW
- COP (A 7 °C / A 20 °C)
- 4.45 · 4.36
- Cooling capacity (A 35 °C / A 27 °C)
- 35.00 · 37.00 kW
- EER (A 35 °C / A 27 °C)
- 4.02 · 4.20
- SCOP · ETAs (average climate)
- 5.15 · 5.04
203% · 198.6% - Prated (average climate)
- 36.17 · 39.57 kW
- Energy class
- A+++
- Operating temperatures
- Heating −25°C / 28°C · Cooling 5°C / 45°C
- Refrigerant
- R32 · 7.4 kg
- Compressor
- Vapour-injection scroll inverter
- Fan
- Inverter BLDC axial · max 640 rpm
- Nominal airflow
- 17,203 m³/h
- Sound pressure at 5 m*
- 38 dB(A)
- Dimensions (HxWxD)
- 1257 × 1791 × 641 mm
- Weight
- 285 kg
* Value obtained with flow grid and silence kit installed.
- Power supply
- 400 V / 3 ph / 50 Hz
- Electrical input
- 14.2 · 16 kW
- Inverter
- 30 · 38 A
- Circuit breaker
- 4 × 25 · 4 × 32 A
- Cable cross-section (up to 5 m)
- 5G4 · 5G6 mm²
- Max distance outdoor – indoor unit
- 30 m
- Connectable indoor units
- 1
Indoor unit
Choose the indoor unit
One indoor unit is configured with each outdoor unit. Three indoor configurations are available, depending on how you want to distribute the air.
Split
Choose it if: you want to treat the air directly in industrial environments and large spaces.
- Noise at 3 m
- 42 dB(A)
- Airflow
- 5,800–14,000 m³/h
- Air throw
- 25 m
- Dimensions (HxWxD)
- 1090×1253×765 mm
- Weight
- 100 kg
Ducted
Choose it if: direct discharge could disturb people or processes, and you want to distribute the air evenly through ducts.
- Noise at 3 m
- 55 dB(A)
- Nominal airflow
- 11,000 m³/h (9,300 with filter)
- Available pressure
- 230 Pa (180 with filter)
- Dimensions (HxWxD)
- 978×1598×1011 mm
- Weight
- 208 kg
Floor-standing
Choose it if: you want to heat where people work, not under the roof. It stands on the floor and has automatic motorised louvres.
- Noise at 3 m
- 65 dB(A) (51 at reduced speed)
- Airflow
- 9,000 m³/h (4,600 reduced)
- Air throw
- 30 m
- Dimensions (HxWxD)
- 2470×1420×1000 mm
- Weight
- 250 kg
Installations
Who chose Kita Air
KITA AIRSplit indoor unit
Milan (MI), Italy
Installation of 1 Kita Air, 39 kW
company specializing in the repair and replacement of vehicle glass
Total power: 39 kW
KITA AIRSplit indoor unit
Pianiga (VE), Italy
Installation of 2 Kita Air, 39 kW each
CMM Italy srl, manufacturer of thrust bearings for industrial doors and gates
Total power: 78 kW
KITA AIR COLDOutdoor unit
Crocetta del Montello (TV), Italy
Installation of 10 Kita Air Cold, 40 kW each
De Castelli srl, metal structure manufacturer focused on design and architecture
Total power: 400 kW
KITA AIROutdoor unit
Treviso, Italy
Installation of 15 Kita Air units, 12 split and 3 ducted
company with a 6,000 sqm site
Total power: 585 kW
KITA AIR COLDSplit indoor unit
Amsterdam, Netherlands
Installation of 2 Kita Air Cold, 40 kW each
Welkoop Store, a 1,300 sqm store
Total power: 80 kW
KITA AIRDucted indoor unit
Vicenza, Italy
Installation of 1 ducted Kita Air, 39 kW
well-known Italian automotive company
Total power: 39 kWDocumentation
Data sheet KITA AIR PDF · 4.5 MBInstallation manual for R32 air-to-air heat pumps PDF · 10.5 MBAdvice
Which indoor unit suits you? Let’s choose together
Tell us about your space: a Templari technician will help you find the right configuration.
Talk to a technicianInsights
Heat pumps in industrial buildings: the five real drawbacks and how to solve them
Why our heat pumps defrost less
Timed or demand defrost: when the heat pump decides to stop
Heat pump sizing: an inverter heat pump is sized to run at half capacity
Rotary vs scroll compressor: what it tells you about the heat pump in front of you
Rated and useful capacity: how much a heat pump heats when it is cold
Air to air heat pump: how it works, pros and cons, and when it makes sense for heating
How many kW are needed to heat an industrial building
Warehouse heating with a heat pump: underfloor or air-to-air
FAQ
Frequently asked questions
The answers you need before requesting a quote.
Do I need a hydronic system?
No. The outdoor and indoor units are connected directly by refrigerant, up to 30 m apart, with no storage tanks or intermediate hydronic circuits.
KITA AIR or KITA AIR COLD?
KITA AIR delivers 39 kW and KITA AIR COLD 40 kW (A7 / A20). The COLD is the one that delivers the most in cold weather: 35 kW at −7 °C and 30 kW at −20 °C.
How much does it deliver in very cold weather?
KITA AIR delivers 32 kW at −7 °C outdoors (COP 3.20) and 27 kW at −20 °C (COP 2.50). The COLD version 35 kW at −7 °C and 30 kW at −20 °C.
Split or ducted?
The split unit supplies air directly into large spaces, with an air throw of 25 m. The ducted unit distributes it through ducts and is the right choice where direct supply would disturb people or processes.
Can I control several units together?
Yes: up to 15 units can be controlled from the MULTI-AIR panel, in addition to the K-TOUCH touch display of each system.
Contact us
Request a quote
Tell us about your space: a Templari technician will get back to you within 24 hours.
