K-Touch air-to-air
For those with a single heat pump: workshops, shops, single rooms.
- Heat pumps
- 1 KITA AIR, KITA AIR PREMIUM or KITA AIR PLUS
- Display
- 7" touchscreen
- Functions
- profiles, weekly schedule, weather compensation curve
Home >
Remote control for air-to-air heat pumps
Industrial buildings, warehouses and workshops always at the right temperature. From a single touch panel you control up to 15 KITA AIR range heat pumps, also from your PC or smartphone.
15heat pumps from a single Multi-Air panel
48half-hour time slots per day, 7 days a week
4profiles: ECO, DAY, NIGHT and MANUAL
The problem
Every area has its own hours and temperatures. There is only one panel.
The warehouse can stay cool at night, the workshop runs in shifts, the offices want 20 °C from 8 am. Managing each unit from its own controller means walking around the whole plant and forgetting units left on over the weekend. With K-Touch and Multi-Air every zone has its own schedule, and you control everything from a single screen, on site or remotely.
Warehousenight 14 °CNIGHT
Workshop · 2 shifts6:00–22:00DAY
Officesfrom 8:00 · 20 °CDAY
Showroom · SaturdaystandbyECO
The panel
One panel, two configurations
The K-Touch is the command centre of the system: it communicates with the heat pumps and connects to the internet with a network cable.
K-Touch Multi-Air
For industrial buildings and logistics hubs divided into several zones.
- Heat pumps
- up to 15 KITA AIR, KITA AIR PREMIUM and KITA AIR PLUS, each with its own settings
- Display
- 15.6" touchscreen
- Functions
- single overview and centralised alarms
The software
What you can do from the panel
Plant overview
For each unit: status, temperature and compressor load.
Ready-made profiles
ECO, DAY, NIGHT and MANUAL, with separate values for winter and summer.
Half-hour schedule
48 time slots per day, 7 days, with copy and paste. With no profile set, the unit switches OFF.
Weather compensation curve
The setpoint follows the average outdoor temperature of the last 24 hours, for each unit.
Centralised alarms
The alarms of all units in a single list, with the unit in alarm highlighted.
Protected changes
Password for each unit on setpoints, time slots and operating mode changes.
Restart after a power cut
Start-up delay adjustable from 0 to 999 seconds, so the units do not all restart at once.
Zone names
"Warehouse A", "Workshop", "Showroom" instead of unit numbers.
Easy Access 2.0
Your plant on your smartphone
Control the building from the office or from home, switch off units left on on Friday and get Templari support without waiting for a technician on site.
- 1Connect the K-Touch to the router with a network cable.
- 2Write to Templari and one of our operators will send you the credentials to access your account.
- 3Download the app on your PC or smartphone and use the panel as if it were right in front of you.
What you need: internet connection in the building · network cable to the panel · a valid email address.
Use cases
Designed for those who work in large spaces
Production buildingsDifferent temperatures for production, storage and offices.
Logistics and warehousesECO standby at night, comfort only in occupied areas.
Workshops and body shopsTime schedules built around work shifts.
Shops, showrooms, gymsOpening hours and dedicated weekend profiles.
Compatible heat pumps
KITA AIR range, 34–48 kW
Documentation
Multi-Air manual (in Italian) PDFInstallation manual for R32 air-to-air heat pumps PDFAll documentation →Do you have an air-to-water system?
K-Touch with HCC and Multikita
The HCC software controls each room individually, Multikita manages up to 6 air-to-water heat pumps on a single system.
Discover HCCFAQ
Frequently asked questions
How many air-to-air heat pumps can I manage from one panel?
Up to 15 with the K-Touch Multi-Air, each with its own schedule, profiles and weather compensation curve. With a single unit, the 7" K-Touch is enough.
Can I set different hours for each zone of the building?
Yes. Each unit has its own weekly schedule in half-hour slots, so warehouse, workshop and offices can have different hours and temperatures.
Do I need a technician to change the hours?
No. You change the hours from the panel or from the Easy Access 2.0 app by tapping the time slots of the day. You can also copy one day's schedule to another day.
Can I stop employees from changing the temperature?
Yes, access level control can be enabled so that only authorised staff can manage the units.
What happens after a power cut?
The units restart after an adjustable delay.
What do I need for remote control?
An internet connection in the building and a network cable to the panel. After configuration, write to Templari and one of our operators will send you the credentials to access your account.
Contact us
Request a quote
Tell us about your space: a Templari technician will get back to you within 24 hours.
Prefer to talk now? Call us on+39 049 8597400
