At very low outdoor temperatures a heat pump loses output and ice forms on the outdoor unit. Templari machines are built for this: inverter compressors with vapour injection keep the output up when the air is cold, reduce defrost times and bring the machine up to full output sooner.

Warehouses and large industrial spaces: Kita Air
Kita Air is an air-to-air heat pump with R32 refrigerant. It works in any weather: if it snows, just clear the snow off the outdoor unit. The outdoor unit comes in two versions: Kita Air 39 kW and Kita Air Cold 40 kW. You need one machine for every 400 to 500 m² of building, in energy class A+++. Kita Air data sheet.
When sizing a system, the output at -7 °C matters, not the one at +7 °C: the 39 kW Kita Air at +7 °C delivers 32 kW at -7 °C, while the Kita Air Plus goes from 47 to 42 kW (data according to EN 14511).

Homes and apartment buildings: Kita air-to-water
The Kita air-to-water heat pumps cover heating, cooling and domestic hot water without boilers or backup electric heaters. All are monoblock units, single-phase or three-phase. Heating down to -22 °C outdoors, domestic hot water up to 70 °C, natural refrigerant R290. Air-to-water heat pumps from 10 to 49 kW.

Fewer defrost cycles: Kita Air Premium
Kita Air Premium is derived from Kita Air: same refrigerant circuit, built into the casing of the Kita Air Plus, with a 4.4-litre liquid separator, a larger liquid receiver and a sheet-metal cover over the compressor. The result is fewer defrost cycles. It is certified for the German-speaking market. Kita Air Premium data sheet.



